The best grow light for a home tent is a full-spectrum LED from a reputable brand, sized to your tent’s flowering footprint and fitted with a dimmer. It covers every stage, so you don’t need to swap lights.
Cannabis grow lights are the engine of an indoor grow. More than any nutrient or gadget, the quality and amount of light your plants get decides how fast they grow, how dense the buds get and how much you harvest. The good news: modern LEDs have made great light simple and efficient. This guide covers what to buy, how to size it, which light schedule to run and how to hang it without burning your plants.
What Type of Grow Light Is Best for Cannabis?
| Light type | Pros | Cons | Verdict |
|---|---|---|---|
| Full-spectrum LED (board or bar style) | Efficient, low heat, long-lasting, dimmable | Higher up-front cost; cheap ones overstate power | Best choice for home growers |
| HPS / MH (HID) | Proven, powerful | Lots of heat, high power use, bulbs wear out | Mostly replaced by LEDs at home |
| CMH / LEC | Good spectrum | Heat, bulbs, ballasts | Niche |
| Fluorescent (T5, CFL) | Cheap, gentle | Weak for flowering | Seedlings and clones only |
For a home tent, get a full-spectrum LED from a reputable brand, sized to your tent’s footprint. Full-spectrum white light (often with extra red) works for every stage, so you don’t need to swap lights between veg and flower.
How Do You Size an LED for Your Tent?
Ignore “equivalent” watts on the box. Look at:
- Actual power draw (watts from the wall). This is what the light really uses.
- Coverage area the maker recommends for veg and for flower. Flower coverage is usually smaller.
- PPFD map: a chart of light intensity across the footprint. Good makers publish one.
- Efficiency (µmol/J): how much plant-usable light it makes per watt. Higher is better.
- Dimmer: lets you run gently for seedlings and full power in flower.
Match the light’s flower coverage to your tent size. A light rated for a 2×2 flowering footprint belongs in a 2×2 tent, not a 4×4.
Kits: tent kits bundle a light that matches the tent. ILGM sells grow kits, and VIVOSUN sells kits with a full-spectrum LED included. Check the light’s stated coverage before you buy.
Budget alternative: Mars Hydro’s TS-series LEDs include the TSL2000 (300W, official flower coverage 2×4 ft) and the TS3000 (420W, official flower coverage 4×4 ft). Those coverage figures are from Mars Hydro’s product pages, not our tests. See Mars Hydro lights →
How many watts does a grow tent need?
Size the light to your tent’s flowering footprint, not a generic watt number on the box. The section above explains coverage and PPFD. For a wattage-by-tent-size table, see Best Grow Light for a 2×4 Tent.
LED vs HPS: which is better?
For most home tents, a full-spectrum LED is the better choice: less heat and lower power use than HPS or metal halide, with light that works for every stage. The comparison table earlier on this page lists the trade-offs.
What Light Schedule Should You Use for Cannabis?
| Plant / stage | Common schedule | Notes |
|---|---|---|
| Seedlings | 18/6 | Gentle intensity |
| Photoperiod veg | 18/6 | Some growers run 20/4 |
| Photoperiod flower | 12/12 | The 12 dark hours must be truly dark |
| Autoflower (whole grow) | 18/6 or 20/4 | Some run 24/0; many prefer a dark period |
Photoperiods: switching to 12/12 tells the plant that fall has come and triggers flowering. Light leaks during the dark period can stress plants and, in some cases, cause problems like hermaphrodite flowers. Fix any leaks you find with your dry run (grow tent setup).
Autoflowers: they flower by age, so keep the same long schedule start to finish. See Autoflower vs Feminized vs Regular.
Use a timer. Consistency matters more than the exact schedule.
What Is PPFD and How Much Light Does Cannabis Need?
PPFD (photosynthetic photon flux density) is how much usable light lands on a spot each second, measured in µmol/m²/s. It’s the best way to compare light at your canopy. Common target ranges growers use:
| Stage | Typical PPFD range at the canopy |
|---|---|
| Seedlings | ~150–300 |
| Vegetative | ~400–600 |
| Flowering | ~600–900 (higher only with extra CO₂ and expert care) |
These are general guidelines, not rules. Plants show you when they’ve had too much (see light burn below). Phone apps can give a rough estimate; a dedicated meter or the maker’s PPFD chart is better.
DLI (daily light integral) combines intensity and hours. That’s why an auto on 20/4 can run a little lower intensity than one on 18/6 and get a similar daily dose.
How Far Should a Grow Light Be From Cannabis Plants?
Start with your light maker’s recommended hanging heights; every LED is different. Then:
- Seedlings: hang at the highest recommended height, or dim the light.
- Veg: lower gradually over a couple of weeks, watching the top leaves.
- Flower: settle at the flowering height, and keep raising the light during the early-flower stretch so tops don’t get too close.
- The hand test: put your hand at canopy height under the light for half a minute. If it feels uncomfortably warm, it’s too hot for the plant.
Hollywood’s tip: Hang your light on rope ratchets and mark the height on the tent pole with a piece of tape every time you change it, with the date. When something goes wrong (or right), you’ll know exactly what changed. Little notes like that make you a better grower fast.
What Does Light Burn Look Like?
Too much light (or a light too close) causes:
- Bleaching: the top leaves or bud tips turn pale yellow or white, closest to the light.
- Leaves canoeing or tacoing: edges curl up, protecting the leaf from light.
- Crispy top leaves while lower leaves look fine.
How it differs from a nutrient problem: light burn shows up at the top of the plant nearest the light, and lower leaves look healthy. Many nutrient problems start at the bottom (old growth) or show in a specific pattern. See Nutrient Deficiencies.
Fix: raise or dim the light, lower the temperature at the canopy, and keep the canopy level so one cola isn’t sticking up into the hot spot. Bleached tissue won’t turn green again, but new growth will be healthy.
What Are Signs of Too Little Light?
- Long gaps between leaf nodes (stretching)
- Thin, weak stems leaning toward the light
- Small, airy buds in flower
- Slow growth with otherwise good conditions
Fix: lower or brighten the light, train for a flat canopy so all tops get light, or upgrade to a light that covers your full tent.
Do Grow Lights Make a Tent Too Hot?
LEDs run much cooler than HID lights, but they still add heat. Keep canopy temperatures around the mid-to-upper 70s °F (around 24–27°C) with lights on, using your exhaust fan and room temperature. Details: Ventilation and VPD.
Frequently Asked Questions
What is the best light for growing cannabis at home?
A full-spectrum LED from a reputable brand, sized to your tent’s flowering footprint, with a dimmer.
How many watts do I need for a 2×4 tent?
Go by the maker’s flower coverage and PPFD map rather than a wattage rule. Choose a light rated to cover a 2×4 footprint in flower.
Should I run lights 24 hours a day?
For photoperiods in veg and for autos, some growers do. Many prefer 18/6 or 20/4 for a dark period and lower power bills. Photoperiods need 12/12 to flower.
Do I need a different light for flowering?
Not with a good full-spectrum LED. It covers every stage.
Can I use sunlight from a window?
Window light is usually too weak and inconsistent for good results indoors.
Why are my top leaves turning yellow under the light?
Likely light bleaching. Raise or dim the light and check the canopy temperature.
Do LED grow lights use a lot of electricity?
Less than older HPS lights of similar output, but the exact cost depends on wattage and hours. The 2×4 grow light guide has a section on what it costs to run a 2×4 light.
What is the difference between full-spectrum and tunable LEDs?
A full-spectrum LED is built to cover every stage with one setting. A tunable spectrum light lets you shift the mix (for example, more red in flower). Either can work in a home tent; compare coverage and PPFD first.
Next step: Grow Tent Ventilation and VPD · Back to the Complete Cannabis Grow Guide
New to growing? Our beginner walkthrough shows how to grow cannabis at home in one page.
Disclaimer: For adults 21+ and educational purposes only. Grow only where home cultivation is legal, and follow your state and local rules. We make no medical claims. Product details, prices and policies are set by the seller and can change, so check the seller’s page before you buy.

